Check availability
Zubok ZN-3
Price on request
We offer the ZN-3 tooth produced in Zaporizhzhia, high-quality and wear-resistant with a carbide tip that does not chip off upon first contact with soil or asphalt, and the tooth holder does not bend or wear down.
Technical specifications of the ZN-3 tooth
Width: 26 mm;
Height: 95 mm;
Thickness: 13 mm;
Cutting edge extension: 40 mm
Carbide grade: VK-8
Steel grade: 35 XGSA
- High quality
- Fast delivery
- Warehouse availability
Contacts – find out the price and availability by calling us.
The production capacity of our company allows us to produce up to 2000 units per month.
Tooth ZN-3 application area and compatibility.
The ZN-3 cutter is widely used in the field of earthmoving and mining equipment, and it is installed on the following types of special machinery:
– cleaning combine Kirovets 2k with a bar-type working body, ZN-3 teeth are installed on its coal extraction mechanism in cleaning faces, which is a single-channel ring or hinge-folding bar with a cutting scraping-loading chain, to this chain or hinge, ZN-3 teeth are mounted;
– cleaning combine “Temp 2M” with a scraping-loading chain working body;
– chain trench excavators (soil cutter, trench digger), which are designed for installing underground communications in trenches of various depths and widths, parameters determined by the width of the excavator’s working body chain and the maximum depth of the boom (bar) lowering. These excavators (models ETC-165, ETC-161, ETC-1609, and ECU-150) are equipped with a Ural-33 working body with a claw-type scraping chain, into the mounting places of which ZN-3 cutters are inserted on the bar. These excavators have gained the name asphalt cutter due to their ability to cut trenches even in asphalt.
– road milling machine on which ZN-3 teeth are installed. Its working body is a rotating shaft with ZN-1 mounting sockets, which secure ZN-3 cutters for the road milling machine.
The ZN-3 teeth produced by us are equipped with a carbide coating, which we solder using copper solder, rather than powder fixation, as most manufacturers on the market do.
Production of ZN-3 teeth and their quality
The ZN-3 cutter is made of steel 35ХГСА, as the ZN-3 tooth was originally intended for use in coal mines, where flammable gas sometimes accumulates. Naturally, under such working conditions, it is unacceptable for sparks to fly from the metal, which could lead to ignition. Considering these factors, a special alloy of metal 35ХГСА was developed for the production of ZN-3 cutters, which does not spark when in contact with hard soil layers or the metal itself.
Thanks to such properties of the ZN-3 tooth alloy, working conditions for humans have become much safer. During the USSR era, the ZN-3 tooth was mass-produced at the “Krasny Luch” factory. These teeth gained great popularity due to the quality of production for which the Krasnoluch Machine Engineering Plant was famous. This cutter was also produced at the “Victory of Labor” factory. The cutters from this factory were slightly inferior in quality but still have their audience of buyers.
We can also supply ZN-3 teeth from the aforementioned manufacturers.
Analogous cutters with the same characteristics
The ZN-3 tooth is a complete analog of the RP-3 and ZS-40 teeth (cutters). They differ only in that the ZS-40 tooth was produced during the Soviet Union, while the RP-3 tooth is produced in the city of Kopeysk, Russian Federation. A distinctive feature of the ZN-3 cutter is the cut for the pin on the mounting leg, which is usually absent in the Russian analog.
Detailed specifications are available in the product description or on request.
- Delivery throughout Ukraine by carrier or our own transport.
- Payment by invoice; bank transfer for business customers.
- Collection from our warehouse is possible by prior arrangement.
- Exact delivery terms and timescales are confirmed when you order.