Check availability

Support roller ETC-165, roller ECU-150 for boom bars

  • Product code RVL-000698
  • Category Sprockets, rollers, tensioners

from 2 000 UAH

Price incl. VAT

Good day! Thank you for visiting our website.

We offer a support roller for ЭТЦ 165 and ЭЦУ 150, available in 3 different configurations. You can also purchase other spare parts for the trenching machine (bar). Quality spare parts at affordable prices.

Contact the sales department

Specifications of the roller.

Catalog of spare parts for ЭТЦ boom.

Download price list EXCEL.

Contact us to order or get advice

  • High quality
  • Fast delivery
  • Warehouse availability

Chain Support Roller ETC 165, ECU 150 General Information

The ETC-165 support roller is installed on the boom of the bar with a summer working organ. Depending on the model, two or three such rollers may be installed on the boom. The chain of the trench digger lies on the support roller during operation; the support roller prevents it from sagging while digging the trench and serves as a support for chain tensioning.

The basis for good quality indicators is the surface that contacts the chain; without sufficient hardness, the roller will wear out quickly. The technologies we use for metal hardening allow us to achieve a high degree of hardness for both the contacting surface and the other components that make up the support roller of the ETC 165.

Roller Configuration

You can buy the support roller in three configuration options:

– roller for the ETC, ECU summer boom without bracket, axle, and bearings;

– chain support roller assembled with axle, covers, and bushing (without bearings and seals);

You can also separately purchase the necessary repair kit for replacement:

–

  • axle, bushing, and covers of the support roller;
  • bracket for the support roller of the bar;
  • covers of the support roller ETC, ECU;
  • axle of the support roller ETC, ECU;

ETC 165 Support Roller Technical Specifications:

  •          Width: 170 mm;
  •          Diameter: 120 mm;
  •          Made of steel: 40Х, 45;
  •          hardening method: volumetric hardening hardness 43-47
  •          type: solid metal (the sleeve is machined from a solid blank)
  •          Used bearings: 207 bearing 2 pcs.;
  •          Seal: seal 1.2-55х80-1 2 pcs.

Installation and Maintenance Methods

To remove the roller from the bracket, unscrew the axle nut and pull out the axle;

remove the protective covers;

remove the sealing rings (seals);

pull out one bearing, remove the spacer bushing, then remove the second bearing.

Assembly is carried out in reverse order.

Pay special attention to the quality of the replaced bearings, as low-quality bearings fail quickly.

Link to download the catalog with the full list of spare parts at the bottom of the page